Welcome back to the Transparent Telephony series. If you're new, you may want to check out part 1 here: Transparent Telephony - Part 1 - An Introduction.
This series is designed for technical people, programmers, and just general enthusiasts who want to learn: how telephony works, how to setup your own phone server (PBX), how to write telephony applications, and how to reduce your phone expenses. There are tons of neat things you can do with telephony knowledge, so keep reading!
This article will walk you through installing Asterisk on your CentOS or Ubuntu server. If you are going to install on a virtual machine to follow along, I recommend using VirtualBox, as everything should work out of the box. Certain virtual machine programs like Xen have kernel issues which makes installing Asterisk difficult. Also, never ever use Asterisk in production on a virtual machine! You'll have timing issues (this will be explained later in the series).
Before we get started, go ahead and install either CentOS or Ubuntu on your system. Update everything to the latest version. I'll be showing you how to install the latest version of Asterisk stable, so we might as well update our operating system and packages.
You can skip this step as Digium provides yum repositories which will automatically install the latest version of Asterisk for us as well as any dependencies.
First of all, let's install the appropriate kernel sources. We will need these to build against. To figure out what kernel version you're using, run the uname command:
Next you'll want to search for the appropriate kernel packages to install:
apt-cache search 2.6.31
(where 2.6.31 is your kernel version). Once you get a list of packages, install the appropriate linux-headers, linux-image, and linux-source packages that correspond to your kernel version. For me this was:
apt-get install linux-headers-2.6.31-14-generic linux-image-2.6.31-14-generic linux-source-2.6.31
Now install the SSL libraries required to encryption. We'll also install SSH so that you can remotely administrate your server:
apt-get install openssl libssl-dev ssh
Next we'll install all of the tools required to build Asterisk:
apt-get install gcc g++ make automake autoconf build-essential bison flex libtool libncurses5 libncurses5-dev libgsm1 libgsm1-dev libnewt-dev libnewt-pic curl libcurl3 tclcurl libwww-dev mysql-common mysql-client libmysqlclient16 libmysqlclient16-dev sox libsox-fmt-all madplay libxml2 libxml2-dev doxygen
You may also want to install ntp as it's a safer alternative to ntpdate which most system administrators use to adjust the system time. DAHDI, the Digium Asterisk Hardware Device Interface, is very picky about system time, and has been known to crash servers which experience large time corrections. ntp will prevent this from happening as it will periodically adjust the time in small increments which is much safer than performing a single large time adjustment with ntpdate. If you'd like to install ntp, just run:
apt-get install ntp
Now that we've got our dependencies worked out, it's time to actually install Asterisk! We'll install DAHDI, Asterisk, Asterisk Addons, and all of the Asterisk default sound files. We'll also ensure that Asterisk starts at boot, and runs as a system service.
As a disclaimer, these instructions have been largely taken from Digium's website. They have excellent documentation for installing Asterisk using their yum repositories which I will be mirroring here.
List item ownload the centos-asterisk.repo file and copy it to /etc/yum.repos.d/. Here is the repo file:
[asterisk-current] name=CentOS-$releasever - Asterisk - Current baseurl=http://packages.asterisk.org/centos/$releasever/current/$basearch/ enabled=1 gpgcheck=0 gpgkey=http://packages.asterisk.org/RPM-GPG-KEY-Digium
Download the centos-digium.repo file and copy it to /etc/yum.repos.d/. Here is the repo file:
[digium-current] name=CentOS-$releasever - Digium - Current baseurl=http://packages.digium.com/centos/$releasever/current/$basearch/ enabled=1 gpgcheck=0 #gpgkey=http://packages.digium.com/RPM-GPG-KEY-Digium
Clear your current yum cache:
yum clean all
Install Asterisk and its dependencies:
yum install asterisk16 asterisk16-configs asterisk16-voicemail dahdi-linux dahdi-tools libpri
Make Asterisk and DAHDI start at boot. Then reboot the server to make sure they both start up:
chkconfig dahdi on; chkconfig asterisk on; reboot;
Once the system comes back up, run the following command to make sure DAHDI and Asterisk are working properly:
service dahdi status; asterisk -rx 'core show version'
If all is working, you should see something similar to:
### Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: Linux26) 1" (MASTER) Asterisk 188.8.131.52 built by root @ localhost.localdomain on a i686 running Linux on 2010-02-26 20:30:00 UTC
To install Asterisk on Ubuntu, we need to compile it from source.
First of all, download all of the source files from http://www.asterisk.org/downloads. Always download the latest release. The files you will need are Asterisk, Asterisk-Addons, DAHDI Linux / DAHDI Tools, and Libpri. The code below shows what Asterisk release I'll be downloading (current at the time of writing):
wget http://downloads.asterisk.org/pub/telephony/asterisk/releases/asterisk-184.108.40.206.tar.gz wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-addons-220.127.116.11.tar.gz wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/releases/dahdi-linux-complete-2.2.1+2.2.1.tar.gz wget http://downloads.asterisk.org/pub/telephony/libpri/releases/libpri-18.104.22.168.tar.gz
Now, let's install DAHDI Linux / DAHDI Tools. Always install this before Asterisk:
tar zxvf dahdi-linux-complete-2.2.1+2.2.1.tar.gz cd dahdi-linux-complete-2.2.1+2.2.1 make make install make config
Now we'll install Libpri:
tar zxvf libpri-22.214.171.124.tar.gz cd libpri-126.96.36.199/ make make install
Now that we've got both DAHDI and Libpri installed, let's install Asterisk:
tar zxvf asterisk-188.8.131.52.tar.gz cd asterisk-184.108.40.206/ ./configure make make install make config make samples make progdocs
Finally, we'll install Asterisk-Addons which includes some useful functionality:
tar zxvf asterisk-addons-220.127.116.11.tar.gz cd asterisk-addons-18.104.22.168/ ./configure make make install make samples
Now that we've got everything installed, go ahead and reboot the system to make sure that everything starts up automatically on boot. Once the system is back up and running, run the following two commands:
/etc/init.d/dahdi status; asterisk -rx 'core show version'
If all is working, you should see something similar to:
### Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: HRtimer) 1" (MASTER) Asterisk 22.214.171.124 built by root @ ubuntu on a i686 running Linux on 2010-02-28 22:30:53 UTC
Now that you've got DAHDI, Libpri, Asterisk, and Asterisk-Addons installed, your server is ready for production usage!
Our next article will cover configuring Asterisk and making calls to the outside world. Be sure to subscribe to our RSS feed to get notified when our next instalment is released!
If you're looking for some other great Asterisk documentation, you can't do any better than Asterisk: The Future of Telephony, 2nd Edition. It's the most thorough book on Asterisk that you can find, and will teach you everything you need to know to get started with Asterisk.